Check the whole area before backing
Before reversing, make sure the surroundings are clear all around the vehicle. A quick look at the backup camera or one mirror leaves areas unchecked.
Check all around immediately before reversing, after the signal, gear, and steering setup are ready.
Check all around immediately before reversing, after the signal, gear, and steering setup are ready.
Each section below follows an explanation or demonstration in the video. Select a section to play from that point, then practise the skill with appropriate supervision.
Before reversing, make sure the surroundings are clear all around the vehicle. A quick look at the backup camera or one mirror leaves areas unchecked.
The demonstration starts over the left shoulder toward the left-rear corner, then turns toward the right-rear corner. Turn far enough to inspect the areas around the car, rather than performing a token head movement.
The sequence is signal, gear if needed, steering setup, then clearance. Do the 360 check immediately before releasing the brake; once reversing starts, direct attention through the rear window and keep checking as needed.
Book a North Vancouver driving lesson with Zula and work on the skills covered in this guide.